- CSIRO scientists are working on tests that could pave the way for CO2 mineralization deployment in Australia
- Testing and evaluations in this direction are currently being done by the research team of Dr. Lionel Esteban, as well as Senior Research Scientist Dr. Mihaela Grigore and Dr. Saeed Salimzadeh
- The scientists hope that this effort will result in an industry blueprint
Scientists from CSIRO—Australia’s national science agency—are gathering valuable evidence that could carve a path for the development of CO2 mineralization as a storage solution in Australia.
Conventional carbon capture and storage (CCS) stores captured CO2 by injecting it deep underground and relying on pressure and geology to keep it there. This approach carries leakage risks, through which the CO2 stored as a gas or a supercritical fluid could be released back into the air.
Carbon mineralization, on the other hand, involves dissolving CO2 in water and injecting the solution into reactive volcanic rocks, where the CO2 reacts with the rock to form stable solid carbonate minerals, practically converting the carbon into stone.
Drawing from the experience of Carbfix, who successfully achieved carbon mineralization within two years by injecting CO2-saturated water into highly permeable basalt formations in Iceland, Dr. Lionel Esteban, a petrophysicist in CSIRO’s Energy Research Program, has set out to examine the conditions and specificities of potentially deploying this method in Australian sites.
Dr. Esteban’s work is part of a comprehensive assessment, which also includes the work of Senior Research Scientist Dr. Mihaela Grigore and Dr. Saeed Salimzadeh.
Together, the researchers are taking a three-pronged approach to evaluate CO2 mineralization conditions in Australia, working on bulk experimental characterization, pore-scale imaging, and hydromechanical modelling.

The team of Dr. Esteban floods core samples of Australian ultramafic rocks under conditions that simulate shallow reservoirs, typically located around 500 m deep with 50 bar pressure and a temperature of 60°C, tracking what happens during the test using imaging, geochemical analysis, and petrophysical measurement.
Results from these efforts have reshaped previous understandings. Testing showed that the cracks and pores expected to govern fluid penetration are of secondary importance to mineralization success, with mineralogy standing out as the main factor for this process.
Relevant: New CSIRO Roadmap Outlines Potential For Advancing Novel CDR In Australia
In this regard, the mineral composition of the formation and how far it has already been altered by hydration are the main drivers of mineralization, with temperature also being a critical factor, where higher temperatures lower the kinetic barriers to reaction, improving ion mobility and helping reactive minerals to dissolve.
At the cool shallow depths CSIRO is targeting, the research team highlights that kinetic drag must be taken into design consideration.
While Dr. Esteban focuses on bulk experimental characterisation, Dr. Mihaela Grigore is working at a finer scale, using neutron scattering rather than conventional imaging to follow fluid movement and reaction at the level of individual pores and mineral grain boundaries, and Dr. Saeed Salimzadeh is looking at what mineralization does to the host rock once it begins.

This research will cover different phases, starting with mapping and laboratory validation and then transitioning to site selection and pilot design, through which CO2 will be injected and then monitored for results. Ultimately, after successfully passing verification, this work is expected to create a model that could serve as guidance for future commercial projects.
Read more: The Risks And Rewards of CO2 Storage: New Report Finds Leakage Threats Are Manageable
Dr. Esteban’s opinion on CO2 mineralization in Australia
Talking to Carbon Herald, Dr Esteban points out that while Australia has abundant mineral-rich volcanic formations, their geological characteristics differ significantly from those in Iceland.

“Over the past three years, we have examined several hundred samples from Australian volcanic formations. None reached a permeability of 0.1 millidarcy, making conventional large-volume CO₂ injection challenging.
However, our laboratory findings suggest that these older, tighter formations could still be suitable for mineralization. Natural fractures may provide pathways for CO2-rich fluids, while the surrounding rock offers the reactive minerals needed for carbonate formation.”
Even though mineralization in Australia will likely require some engineering, he says, particularly to improve injectivity, the country may already possess many of the required geological ingredients.
“In five years, if everything checks out, we should be able to hand industry a blueprint—this is how to do carbon mineralization in Australia,” says Dr. Esteban.








